Shopping Cart: 0 Items= $0.00

BCD's, Wings & Harnesses

Dive Rite Backplates

Manufacturer Dive Rite

 

XT Lite Backplate

The XT Lite backplate design is based on the original Dive Rite backplates produced since 1984. The lightweight design has evolved to include new features and ergonomics for the modern diver. Laser cut from a thin 14 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver’s back while generously rounded corners prevent the plate from digging in or damaging exposure suits. Additional internal cutouts further reduce weight and add to the plate’s unique look while still maintaining the support needed for the heaviest double cylinder configurations.  All XT Lite plates are CNC deburred guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.

The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two hole positions for the upper bolt providing user adjustability of tank height. Two sets of 2" slots along the center channel allow divers to weave cam straps onto the backplate for single tank diving use without the need for a single tank adapter. Two pairs of holes on side tabs are positioned for use with bungees to be able to sidemount stage bottles. A series of additional holes along the outer edges of the backplate provide different options for mounting lights, pony and suit inflation bottles, lift bags, and other accessories.

2” harness webbing slots are used throughout to accommodate either a Basic, Deluxe or Transplate style harness. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. Weighing in at 2.61 lbs (1.18 kg), lightweight stainless steel plates are an ideal option for divers who do not need additional ballast weight on their rigs.

Made in the USA.

  • 14 Gauge low carbon 316L Stainless Steel
  • Laser cut, CNC deburred edges
  • Electropolished and Laser Engraved
  • 2.61 lbs (1.18kg)
  • 5″ (26.7cm)(widest point) x 15″ (39.4cm)
  • 25″ (3.2cm) depth (with contour)
  • In-water buoyancy: -2.5 lbs (-1.13 kg)

 

 

XT Lite Short Backplate

A lightweight design that fits comfortably on a diver with a shorter torso.

The Stainless Steel XT Backplate just got shorter and lighter. This iteration is ideal for many women or divers with a shorter torso. This short backplate’s overall length is 1.5 inches (3.8 cm) less than the standard size. Weighing in at only 2.5 pounds, this light backplate is perfect for traveling or cutting down on weight. Laser cutting, CNC deburring, and electropolishing ensure smooth edges and rounded corners to prevent snagging or discomfort.

  • Material: 316L Stainless Steel (14 Gauge Low Carbon).
  • Weight: 2.3 lbs (1 kg).
  • Dimensions: 10.5 in (26.7 cm) at the widest point x 13.5 in (34.3 cm) tall.
  • Depth: 1.25 in (3.2 cm) with contour.

 

 

XT Backplate

Based on the original Dive Rite backplates produced since 1984, the XT Backplate design has evolved to include new features and ergonomics for the modern diver.  Laser cut from 10 gauge low carbon, rust resistant 316L stainless steel, the unique shape contours the diver’s back while generously rounded corners prevent the plate from digging in or damaging exposure suits. All XT plates are individually finished by hand guaranteeing there are no rough or sharp edges that could potentially damage harness webbing. They are then electropolished to a mirror finish and laser engraved to ensure that they look as good as they perform.

The XT backplate is set up with 11" (27.9cm) on-center mounting holes to accommodate standard double tank bolt kits, including two hole positions for the upper bolt providing user adjustability of tank height. Two sets of 2" slots along the center channel allow divers to weave cam straps onto the backplate for single tank diving use without the need for a single tank adapter. Two pairs of holes on side tabs are positioned for use with bungees to be able to sidemount stage bottles. A series of additional holes along the outer edges of the backplate provide different options for mounting lights, pony and suit inflation bottles, lift bags, and other accessories. 2” harness webbing slots are used throughout to accommodate either a Basic, Deluxe or Transplate style harness. 2" (50mm) and 1" (25mm) slots at the bottom center of the plate allow for any crotch strap up to 2" (50mm) in width to be used. Weighing in at 5.51 lbs (2.50 kg), stainless steel plates are a popular option for divers looking for a more even distribution of ballast weight.  

  • 10 Gauge low carbon 316L Stainless Steel
  • Laser cut, hand finished edges
  • Electropolished and Laser Engraved
  • 5.51 lbs (2.50kg)
  • 10.5″ (26.7cm)(widest point) x 15″ (39.4cm)
  • 1.25″ (3.2cm) depth (with contour)
  • In-water buoyancy: -5.5 lbs (-2.5 kg)


 

XT Backplate Short

Perfect for the diver with a shorter torso to provide a comfortable fit.

The Stainless Steel XT Backplate is now offered in a “short” size. Ideal for women or any diver with a shorter torso length, the short plate has an overall length of 13.5 inches (34.3 cm) which is 1.5 inches (3.8cm) shorter than the standard size. All features are the same as the standard plate except that there is only one bolt hole position, and the 1-inch crotch strap slot was eliminated to save space. The Short XT Backplate is still 100% compatible with the Dive Rite Single Tank Adapter (STA), all Dive Rite Wings, and backplate harnesses.

  • 10 Gauge, low carbon 316 L Stainless Steel
  • Laser cut, hand finished edges
  • Electropolished and laser engraved
  • 5.41 lbs (2.45 kg)
  • 10.5 in (26.7 cm) at the widest point x 13.5 in (39.4 cm)
  • 1.25 in (3.2 cm) depth with contour

Available:
Today

Price:
$220.00
Size:
 
Quantity:
 

Related Products

Dive Rite Line Cutter

$40.00

BCD Cleaner

$19.00

Dive Rite XT Fins

$259.00

Accessories

Crotch Strap with QR

You like the convenience of a Quick Release buckle? The Crotch Strap QR Buckle is a welcome change to old industry standards.

$ 14.00

Crotch Strap 1.5-inch

Avoid drysuit chafe and wetsuit wear and tear with a slimmer version of the standard 2-inch Crotch Strap. Preferred by scooter divers, due to the added comfort of a wide strap, this 1.5-inch (38.1mm)

$ 14.00

Dive Rite Basic Harness

Embraced by DIR purists who prefer a streamlined rig without buckles, chest strap or padding, the Basic Harness is a clean, simple harness intended for use with hard metal backplates.

$ 80.00

DiveRite Deluxe Harness

A webbing harness designed for hard backplates that provides comfort and streamlining. Swivel points on the shoulder straps ensure a comfortable fit.

$ 95.00

Dive Rite Thigh Pocket

Dive Rites new Thigh Pocket includes an innovative leg band made of a proprietary material used in bandages. The material holds up to salt water and dries quickly, plus silicone strips placed on the inside of the band grip your exposure suit and keep the leg band in place.

$ 110.00

Sidemount 2 Zip Bellows Pocket

Adding the Bellows Horizontal Zip Pocket w/Daisy Chain (AC3204XL) to your diving rig allows you to bring everything you need on a dive and takes the worry out of losing your valuable gear.

$ 99.00

Vertical Zip Pocket

Adding the Bellows Vertical Zip Pocket  (AC3203) to your diving rig allows you to bring everything you need on a dive and takes the worry out of losing your valuable gear.

$ 80.00

Crotch Strap 2-inch

Preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2-inch width provides. Includes a neoprene sleeve to protect exposure suit from abrasion.

$ 29.00

Nomad Weight Plate

Nomad divers who need to add weight to their rig will want the new Nomad Weight Plate. Carrying up to 16lbs of weight in four separate pockets, the Nomad Weight Plate attaches to the back of the Nomad using the existing grommets in the backplate.

$ 159.00

Deluxe Harness QR

A webbing harness designed for hard backplates that provides comfort and ease of entry/exit along with streamlining. Swivel points on the shoulder straps ensure a comfortable fit.

$ 110.00

Transplate Harness

A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate.

$ 219.00